Booster

Electric boosters are designed to fit under counters and deliver sanitizing rinse water for all stationary rack and conveyor type commercial dishwashers

Our 10 Gallon electric booster will raise preheated or cold water to 180° F rinse temperature for compliance with UL sanitation (NSF5) and all federal, provincial, municipal and local health department sanitation codes. They are available in 6 kW through 18 kW and in 208, 240 and 600 voltages.  

NOTE: Not approved for use as a circulating booster water heater for continuous operation in a gravity or pump circulation application. 

System Sentinel
All electric booster models employ an element diagnostic panel,utilizing light emitting diodes (L.E.D.), corresponding to the number and location of each heating element. L.E.D.’s are energized when the electric elements are operating. An unlit L.E.D. pinpoints the exact location of a non- functioning element, making element operation diagnosis simple and positive.
Long Life Tank Design
Proprietary steel formulation with a unique coat of high temperature porcelain enamel maximizes corrosion resistance resulting in a superior tank design.

Long Life Heating Elements
Separate screw-in type elements feature a Nichrome wire filament, embedded in magnesium oxide sealed in a copper tube to resist water chemical corrosion…for long element life and a long life performance. Elements are directly immersed in the water for maximum recovery efficiency (98%) and are easily changed by simply screwing new ones into the tank.

Integral Fusing
All models have integral fusing for each element.

Anode rods
Two (2) magnesium anodes are installed in each tank for maximum corrosion resistance.

AGA/ASME Rated T&P Valve
Factory installed relief valve

Electrical Connections
Pre-wired, accessible control box with multiple knock-outs on side insize selections to match the National Electric Code. Sizes range from 1/2" to 2". A grounding screw is provided for attaching an equipment grounding conductor.

Single Panel Control Box
It comes with hinged stainless steel door that provides immediate access to all electrical components and elements.

Terminal Block
All models are equipped with UL Listed terminal blocks for simplicity of installation. The terminal block will accept either copper or aluminum field connect wire.